UCI Hardness Tester alphaDUR mini BAQ
Incoming goods inspection.Hardness testing of metals in production. Testing of machine parts, weld seams, coatings and hardened parts even at difficult to access locations and at any angle
SKU: aplhaDUR mini
Description
The alphaDUR mini is the small and handy variant of the alphaDUR which has been successfully used in hardness testing since many years. The technology is identical and the accessories are compatible.
The operation of the alphaDUR mini is very easy because all information is shown on the large display. Hardness scale and material can quickly be changed by special keys.
Due to the UCI measuring method measurements can be done fast and accurate. The measured value is displayed directly after the test load has been applied. A test load between 0.3 kg (HV 0.3) and 10 kg HV 10) can be chosen depending on the application and the sample surface.
More Information for the selection of an propper probe are available in our application support documents.
- Measuring method: UCI according to DIN 50159 and ASTM A 1038-05
- Test load: 3, 10, 20, 30, 49 or 98N, depending on the UCI probe (HV0,3-HV10)
- Testing Materials: Preferably metals, material calibrations can be saved in the device. Measurements on glass, ceramic and plastic are possible if comparison measurements for calibration are done. Minimum thickness for steel app. 5mm (depending on the sample geometry)
- Hardness scale: HRC, HV, HB, HRB and tensile strength
- Uncertainty of measurement: <2% to the value of the hardness test block
- Display: Colour LCD 320x240pixels
- Interface: USB
- Data memory: 100.000 data records with date, time and GOOD/BAD rating
- Data transfer:
– Direct protocol printout with mini thermal printer
– PC software
– Data transfer on USB flash device - Statistics: Average value, minimum, maximum, standard deviation
- Battery: Built-in Li-ion battery, battery life approximately 6,5h, rechargeable by charging adapter or USB port
- Dimensions: 130x80x23,,
- Weight: Device 320g, probe 190g
- Minimum sample thickness: Approximately 5mm (depends on the dimension and the shape of the sample)
