Laser Marking FlyPeak LASIT
Laser Marking FlyPeak by LASIT with peak power 3 times higher than the green lasers on the market and 50 times higher than the fiber laser.
SKU: FlyPeak
Description
The FlyPeak laser by LASIT is the revolution of laser marking on plastics. This DPSS system (Diode Pumped Solid State) combines high peak power with a much shorter pulse duration than solid-state lasers on the market while maintaining average power: there is currently no laser source on the market with the same performance.
FlyPeak operates in a single shot to 100kHz range with a pulse-width between 2 and 10 ns.
Controlling the heat input is a determining factor in obtaining quality marking on plastics: too much heat can create burns at the edges of the marking, compromising the quality and therefore the contrast: instead of the white color, we will obtain a brown-yellow color.
The FlyPeak laser pulse is always below 10ns throughout the range (at 20kHz = 3.5ns), which lets us cool down the marking compared to traditional nanosecond lasers, including fiber lasers, and consequently increase the quality of the process and result.
- Technology: Laser Nd: YV04 diode-pumped
- Wavelength 532 Nm
- Max average power 5W
- Max pulse energy 400μJ
- Repetition rate Single shot to 100kHz
- Pulse width 2 to 10 ns
- Max peak power 200kW
- Polarization Linear 100:1 (option: circular polarization)
- Beam quality M² < 1.5
- Cooling Air-cooled (option: water cooling or contact c.)
- DC voltage IN 24V
- Total weight Drawer and shroud -> 10.4Kg FLYPEAK -> 9.6
- Maximum Absorption 250W
- Electrical connection 110-230 Vac (L+N+Gnd) 50-60Hz
- Interconnection cable Stainless steel armored ø25mm length
- Operating temperature 15°C – 35°C without condensation
