Crack Depth Meter RMG 4015 KARL DEUTSCH
Crack depth meter RMG 4015 by KARL DEUTSCH which is a reliable device and it can be offered with many probes for different uses
SKU: RMG 4015
Description
The crack depth determination by means of the potential probe method is based on the measurement of electrical resistance between two points on the surface of a metallic workpiece.
The Crack Depth Meter RMG 4015 measures crack depths on workpieces made of steel, iron and austenite and can also be used for cracks on copper, brass and aluminium and on most non-ferrous metals. Special probes are available for the measurement of inclined cracks. The RMG 4015 is an ideal supplement to PT or MT testing.
Key Facts
- Measuring range: 0 mm to 99.9 mm in electrically conductive materials like iron or steel, 0 mm to 12 mm in aluminum, copper, brass
- Crack depth measurement is also possible on inclined cracks in ferromagnetic materials
- Special probes for complex shaped surfaces and difficult to access measurement locations are available
- RS232-interface: Print measuring protocols instantly via the KARL DEUTSCH mobile printer 6010 or communicate with a PC
- Multi-point material correction function to optimize the measurement results
- Principle of measurement: AC electrical potential drop method
- Dimensions (WxHxD): 83x151x35mm
- Weight: 225g
- Power Supply: 2×1,5V AAlkali-Manganese dry cells, size AA (mignon), alternatively 2×1,2V NiCd or NiMH rechargeable batteries, size AA. Opticalalarm in case of empty batteries
- Operating time: At least 11,5 hrs with Alkali-Manganese cells
- Data storage: A total number of approx. 3850 values can be stored in up to 300 batches
- Measuring range: 0mm to 99.9mm
- Measurement accuracy: Depending on material and measuring range. Typical figure for two-point materila correction: ferromagnetic material 3 to 15%, austenic material 3 to 25%
- Serial interface: RS232C to KARL DEUTSCH printer or PC: 4800 bauds, 8 data bits, 1 stop bit, no parity bit. USB-adapter available
